MaximumMetalWorks

Maximum Metalworks | V2.0

HERE ARE SOME OF OUR CUSTOMERS BIKES USING
MAXIMUM METALWORKS FRAMES


Road Runner Cycles "Click on photo for more pics"


MAXIMUM METALWORKS 200mm Rubbermount frame kit 10" up stretch 5" out 45 degree total rake. 100 polished engine beautifully done by the Mike and the guys at Roadworthy motorcycles to see this bike and more visit them at www.roadworthymotorcycles.com "Click on photo for more pics"		6" out, 8" up. 38 degree maxmetalworks 250 frame 5 degree perse trees independent tank (stretched) "whiskey" fat katz fenders w/ max struts rounded,pointed and welded to fender metal monster wheels 113 S & S polished cases, black wrinkle cyl. and heads w/ polished fins 6 spd RSDHI TECH 5" primary stainless hard brake linesstainless hard oil lines Perse frwd and hand controls built by howler custom cycle "Click on photo for more pics"


To see more pictures of this cool bobber please click on photo for more pics		MAXIMUM METALWORKS right side drive hidden shock frame kit with 5" of backbone stretch 0 inches in the downtubes and a 42 degree rake. Designed by Danny Lawrence "Click on photo for more pics"


Maximum Metalworks 250mm left side drive frame kit With HD motor and tranny. B' COOL fenders, BDL open belt Mid-Usa brakes and front end, custom stretched tank black base and candy orange top coat. built by Holeshot out of Hagersville, Ontario "Click on photo for more pics"		Maximum Metalworks 280mm hidden shock frame kit with a 3" stretch in the backbone and 42 degree rake. Featuring Max Metals 3 degree trees Meanstreet lower legs, James Custom Cycle gas tank and PM brakes and wheels. see more of their work at www.jamescustomcycle.com "Click on photo for more pics"


250mm maximum metalworks soft-tail frame kit with 5" backbone stretch 3" up stretch and 40 degree rake with some nice custom sheet metal, and great lines built by ralph and the guys at pm cycles ltd. from Nova ScotiaTIA. www.pmcycles.ns.ca "Click on photo for more pics"		250mm right side drive maximum metalworks rigid style frame. with a 5'" backbone stretch and a -2" downtube stretch. 42 degree rake with another 7 degrees in the trees for that long low look ,beautiful black with ghost flames. built by the guys at cycle fab limited phone # 815-919-4360. "Click on photo for more pics"


RNR Custom Cycle Ltd. "Click on photo for more pics"		McKay's cycle creation "Click on photo for more pics"


240mm Custom rubbermount frame with a 2" backbone stretch and 34 degree rake was built using a 2" longer swingarm to accept the power from a 124 cubic inch twin cam engine built by Stepane Crete and motosport G.P. from Victoriaville Quebec "Click on photo for more pics"		250mm soft-tail frame kit with a 5" backbone and -2" downtube stretch with a 42 degree rake This frame is an another show winner from Jimmy Pacwa and twistedtwin.com "Click on photo for more pics"


built by Lee and the guys at broadwaychoppers.com using a maximum metalworks frame and front end "Click on photo for more pics"		built by lee and the guys at broadwaychoppers.com using a maximum metalworks frame. check these guys out for top quality work "Click on photo for more pics"


300mm Rigid frame with single radius downtube and an 8" backbone and 10" downtube stretch using extensive sheet metal work. Built by Paul from Judgment Motorcycles. located in Hollywood, Florida "Click on photo for more pics"		250mm tire Soft-tail frame kit with a 5" backbone and -2" downtube stretch and 45 degree rake.built by Jimmy Pacwa. to see more of Jimmy's work you can visit them at www.twistedtwin.com "Click on photo for more pics"


250mm custom soft-tail frame kit with a 4" backbone and a 2" downtube stretch,and 40 degree neck.Using a 124" S & S motor and 6 speed transmission with lots of go fast goodies built by Killer Clown Kustoms and Chubby Built Fabrication from Chesapeake,Virginia. "Click on photo for more pics"		250mm custom soft-tail frame kit with a 4" backbone stretch and a 40 degree neck rake with another 5 degrees in the trees.124 S&S engine,6 speed tranny, hand fabricated sheet metal. Built by californiachopshop.com California USA. "Click on photo for more pics"


240mm Custom Soft-tail frame kit with a 4" backbone stretch and a 6" stretch in the downtubes, and a 36 degree neck rake. Built by Northern Thunder Classics Montreal, Quebec Canada. "Click on photo for more pics"		200mm Custom Soft-tail frame kit with a 3" stretch in the backbone, and a 5" stretch in the downtubes, and a 36 degree neck rake.Built by Cycle City Longuieul, Quebec Canada. "Click on photo for more pics"


280mm tire fit on our 250mm tire Custom frame kit with chain drive only.Tight fit but it works.Built by Fab Cycle Laval, Quebec Canada. "Click on photo for more pics"		250mm Custom Soft-tail frame kit with a 4" stretch in the backbone and a 6" stretch in the downtubes, and a 35 degree neck rake. Built by Fab Cycle Laval, Quebec Canada. "Click on photo for more pics"


250mm custom soft-tail frame kit with a 5" backbone stretch a -1" downtube length and a 40 degree neck rake.Called the Kozak it features a 124" S&S engine with a 6 speed MID-USA tranny and a Goldhammer front end. Built by Raw Power Custom Cycles and Outlaw Racing from Regina Saskatchewan Canada. "Click on photo for more pics"